I have used Acronis Image Server before to create a complete image of a
server, which I then recreated a RAID and put the image back on top
successfully.
Does anyone else out there know of any other more cost-effective solutions

For some time the Physical memory was running at 98% with 1GB memory
installed, I have managed to upgrade the memory to 2GB and the Physical
memory was running between 35 - 55% now a week later it is back up to 98%
and the Store.exe is using 982,000.00KB Can this be fixed?

We have a w2k3 domain. We have over 100 dhcp scopes on this one server. We
want to know how to get a detailed list of all of the scope settings on this
box for each scope. We need to submit a report of each scope setting. Does
anyone know of an easy way to get this information.

I'm using Windows Ntbackup to backup my data (system state and office
documents) on DLT and Ultrium (with windows 2000 server and windows
server 2003) and all my test restores are always working perfectly.
Today, browsing the Internet I found this article:

Is it perfectly safe to install Windows patches via Remote Desktop for
Administration in Windows 2003? What about regular applications? Should one
always use the console switch?
Thanks,

I was getting browser error 8021 and 8032 in my system log and then my
Windows 2003 std sp2 server would lose communication and have to be rebooted.
Not sure if it's related, but when I later tested with browstat status from
that machine I would get (on average) 10 successful ...

It seems the floppy drive A is not working.
I get "No ID address mark was found on the floppy disk" whenever I put a
floppy in. This problem was discovered when I did a FULL BACKUP using the
BACKUP utiliyt in W2003.

Every night I was used to perform a scripted backup of the virtual machines
(VMware server 1.x) that are on a Windows 2003 host server.
The VMs are suspended just before to invoke ntbackup and restored at the end.
Since a couple of weeks i get errors like this in the ntbackup log:

Dear Folks,,
We have win 2003 server which is accessed by remotely by other system
administrator....I have created one security policy file in JPG to
show the remote user.

How did you fix it !?

I'm using robocopy.exe to move old files to another server, I have started
copying files that are create from 31/12/2000 and before.  Now all the files
do get moved across, but it will also create the entire orginal folder
structure, so I get folders with nothing in them because ...

I have a Windows Server with another Terminal Services Server. I have setup
a backup on the server to happen every night with a DAT tape. As you might
have noticed from earlier posts this is now getting quite full. I have also
noticed that there isn't a backup facility on the TS ...

Our Windows 2003 server randomly shuts down.  It happens approx 3 to 4 times
per week usually at night.  No helpful messages in the event viewer.  One
thing that I have found strange is that when you select Restart on the server
the server shuts down and when you select Shut Down ...

I am getting backup report with following errors:
UsrClass.dat.LOG error: "the Process cannot access the file because it is
being used by another process" pointing to c:\docs &
settings\administrator\local settings\application

Hi, I have a Mac laptop and I have trouble to connect to a share drive on the
2K3 SBS domain. I am sorry if my question is not in this discussion board.
Please help to show me where I can post my question.
Regards.