Our domain is NT4, our client computers are primarily 2000 Pro with some XP.
Most of our servers are members servers with 2003 as the OS. We had a 2000
Server that we were using as a time service for the 2000 Pro -it has failed
and we need another time server. The powers to be ...

I have the MSDN set of CDs.  I installed Server 2003 Standard from the CD,
then upgraded to SP1 and am now trying to install the R2 CD.  It keeps
telling me that I entered an invalid product key.  I've entered the product
key for the original Windows 2003 CD as well as the R2 CD ...

I new to Windows servers and after setting up a new domain controller, I
noticed that when browsing network shares as a user I can see the Netlogon
and SYSVOL folders. I can also enter them and list/read the contents, granted
there is no write access.

We just got a new server has (5) 300GB disks in it, C: is 40GB want to use
the rest, when i use the HP array utils to make a drive it says that some
operating systems will have a problem with partitions bigger than 502GB, what
is the limit of a partition size and what Operating ...

I have an issue which I'm attempting to determine if this is a default action
of Server 2003.  The server is 2003 domain controller multihomed with one nic
pointing to the wan and the second nic pointing to the lan.  To access the
firewall I have to disable the lan card otherwise ...

Is it possible to assign two IPs to the same NIC on Windows 2003 Server?  If
yes, could you give me some pointers please?  I am a beginner.
Thanks
Mehdi

We run a regular cycle of hardware replacement.
My Domain controllers and production Exchange 2003 servers are due for swap
out.
I, ideally need to duplicate my existing configurations on newer hardware.

Ok,
I replaced the guts of a server with a new motherboard and sata raid.
Everything goes fine, windows takes the raid drivers on the F6, I format the
drives, reboot, then I see the W2K flash screen, then it fails to the

I have not worked with RAID 1 in quite a while.  A client has servers set up
with RAID 1.  The three boxes are all Proliant DL360 G3 - (I typically
purchase poweredge servers).  Do the raid controllers support the ability to
boot off of either drive without changing the boot ini? ...

Hi, I'm looking for a software (preferrably less than $300) that will
allow me to create a partition on Windows Server 2003.  I've found a
couple software packages, but every version that is able to be
installed on Windows server costs like $500.

We recently deployed SBS and now have more users than we expected, so we
need to rectify the licensing issues.
Basically it's SBS that is just running IIS and Exchange 2003 SP2.  We have
the 5 CALS that came with SBS installed and recognized.

I thought this was a no-no,- there is at least one KB article that
says so,  but looking at SBS 2003, I see that by default it does
install both. What's going on?
Thanks,

1) Whywhen restoring my system and I review the setuplog.txt why does it
reference
the following when my server is not named srv03? ( I have checked another
server

I have a Dell server that I purchased fm a company that went out of business,
it's running 2k3 and was a DC on a network that was very basic.  I want to
add it to my network but not as a DC, it will be an application server.  I
have the following questions:

I need the capability of FTP'g to my 2k3 server from within my network.  I'd
like to limit FTP access to a specific directory.
tks,
steve