I have a PC with 2000 sever.  It does not work properly.  I want to reformat
C: and reinstall it.  After I went in the Recovery Console, I got C:\WINNT>
prompt.
I typed format c: and pressed Enter key.  It displayed a message "CAUTION:

Which should I upgrade first Windows 2000 server or exchange 2000,my Windows
2000 is main D.C and situated the same server with Exchange 2000, any good
link to recommed?

Hi NG,
after installing W2k3SP1 my server FSC TX300 Dual-Processor with Adaptec
2120S RAID-controller runs into BlueScreen STOP 0x0000007B after rebooting.
What can I do to get it running again without rescuedisk available.

I'm trying to setup netlogon scripts to run automatically on domain logon.
The scripts run if I run them manually with no problems.
I've simply copied the script I want to run (logon.bat) into the NETLOGON
share, and specified "logon.bat" as my logon script.

I am configuring a newly-acquired UPS from APC.  I have installed and tested
the hardware and software.  One glitch remains: although the OS shuts down
(hibernates) after the designated delay, the "default.cmd" file does not
execute the 'net stop xxx' commands I entered into it.  ...

I would like to install Antispam (Symantec Brightmail) server between
Internet and LAN. Antispam server need  SMTP server.
I only need to send mails form one IP to another IP.
I do not know how to setup SMTP server on MS Windows 2003 Server.

i have two nics connected to my server.
this server is connected to a lan with range 10.0.0.0/24 .i have
another router with an ip address of 192.168.5.1 behind that router is
a network with range 192.168.*.*

Problem 1: I wrote a Windows Service.  We tested it by installing it to the
C: drive.  When we try to install it to the E: driver, the .NET 2.0
setup program refuses to do it.  What happens is that it manages
to create an empty directory on E:, but then performs the complete

I'm faced with the task to rebuild a server that has many key roles in our
environment.  The server is a Global Catalog Server, a Domain Controller (1
of 2), a DNS Server (1 of 2 ) and our only Exchange Server.  Any a advice or
ideas is greatly appreciated.

I have several XP and w2k boxes that I am moving from an NT 4 Domain to a
2003 domain.  I am expriencing all kinds of strange errors on these machines
after the move.  All software is installed on the individual machines, not
on the server.  But Microsoft Office 2000  is giving ...

I currently have a software (Microsoft) raid 1 configuration using dynamic
disks for my boot and data partitions. The motherboard supports "intel matrix
storage technology". It has hardware raid (ICH6R) on board but I never used
it. Is there any way to switch from software raid ...

I have a server that is using an onboard raid controller setup with raid 10.
The 4 hard drives are SATA drives. I am installing a new controller card and
an additional 8 drives. I want to move the exisiting installation to these
new drives.

All:
I want to install W2K3Server Std in a folder other than c:\windows. Not dual
boot, I want to boot form c:\Bullwinkle or Rocky.
I tried creating a small DOS partition with c:\windows, but setup doesn't

I have 2 partitions on my system - C: with WinXP and D: with W2003. I would
like to re-install the Win Server 2003 on D, however, I do not want to damage
the XP system while re-installing the W2003 system (something I have done in
the past). Can someone please tell me what the ...

I have a win2k3 server running Exch2003. This server is the only DC in the
network. I need to reinstall this server on the same hardware. I know I can
introduce a temporary DC and transfer all FSMO roles etc, but how do I handle
the exchange database? Do I need to uninstall ...