Has anyome managed to sucessfully talk to the HP 6i controlelr via ADS's
deployment agent? I have 2 models of server, the DL360 G4 and DL380 G4, both
are displaying the same symptoms. Any jobs run against them fail with the
error "Failed to find volume".

I want to use this command in a netlogon bat file
rundll32 printui.dll,PrintUIEntry /q /in /n "\\server-s1\HPLaserJ"
It works great, except it pops up a message on the client computer "you
are about to connect to a printer on server-s1. click ok to continue"

I have a Windows 2003 Server Standard on a cloned Pentium 4 system.  The
current disk subsystem is an IDE RAID 0 which is done by the built-in Intel
RAID controller on the motherboard.  I am going to upgrade to a SCSI RAID 5
with Adaptec RAID 2120S as the controller.  What would ...

I am working on a prject to determine to use imaging or script; RIS, ADS,
Ghost or Altiris.  I was wondering (and I KNOW this is a real general
question), but I am looking for some information on pros and cons of imaging
or script based install, and the different deployment tools.  ...

I'm using ADS 1.0 and installing HP Servers.
I just installed a Server (DL380 G4) - W2K3 Standard Server.
Then I created a Job that installes the HP Drivers in silent mode (there are
batch-files on the hp-cd).

I slipstreamed sp1 into my volume license server 2003 std CD and
attempted a clean install on two new Dell Poweredge 750's. I've tried
installing with and without using the Dell utility CD and either way
get this error at the beginning of setup, a few seconds after seeing

We have just finished installing Win 2003 standard edition server. Our DNS
server and DC are on the same machine. Before, on NT40, we were using our
ISP's DNS server.
Users at this location are now complaining that internet access is real

I'm in the process of setting up a new domain build around Windows Server
2003 SP1 machines.  I recently installed the first 2 servers and set them up
as Active Directory DCs.  They seem to be functioning ok so far, however I'm
receiving the following event log entries on both ...

I have 2 windows 2003 DC.  one DC, which also has  operational master role,
has all Users shared folder on other hard disk. When I format and install
fresh copy of Windows 2003 on this server and then replicate it from other DC
and change its role to operation Master . This ...

If I am on the server I am able to connect to our internal domain
(\\domain.loc\sysvol\domain.loc) through the address bar in My Computer.
If I log onto a workstation and try to connect to the above I get a message
stating 'access to the resource...has been disallowed'.  I can ...

Could you advise me on the best approach to re-installing 2kserver on our
PDC. The reason being that it has become corrupted after an un-successful
installation of a patch, the machine blue screened about 10 times on boot up
after the installation, wouldn't rollback, after a lot ...

On a win2003 server a user -including administrators- is locked out after a
certain time (the password dialog appears and the password has to be entered
to gain access again):
Where do I change this, please (Help did not yield anything, using various

By default, under Small Business Server 2003, is the master browser
supposed to be enabled?

I have installed WSUS and Windows 2003 SP1 and run the security configuration
wizard. I am not able to download updates from the Windows update server. Can
someone tell me exactly what services should be enabled in the security
wizard so WSUS will work? I have not found any ...

I have a question, not sure if it can be done.  I have a group of servers
that have dual NIC cards.  We have a separate backup server that we use to
backup these servers utilizing remote agents over the primary NIC's.  We'd
like to move the backup traffic off the production ...