We have two NT4 servers: PDC & BDC and planning to be replaced with two new
servers running MS Server 2003 std.  Can any experienced one to share the
effective migration method for such scenario.
Thanks,

i have two U320 SCSI 72GB hard drives in RAID 1 (dual xeon 2.8 + 1G ram, HP
Pro Liant server).
I experienced very low hard disk performances, i.e. the same operation that
takes 1hour on a normal IDE hard disk takes 6hours on the server (the PC has

I spent the past 5 days investigating this and no matter what I try, SP1
can't be used on old Pentium systems.  I have 3 old Pentium servers that have
no harware in common, except for them using Pentium 233 MMX processors.
Upgrading all 3 of the systems to SP1 resulted in system ...

Please take a look at my other post and try to give me some advice.
Thx

I must install Windows 2003 on a server with a disk in SAN (without local
disk), but when I try to install I have a blue screen.
I configured HBA for boot from disk on SAN.
Someone can help me?

I'm in the process of setting up a new AD Domain.  As a starting point, I've
installed 2 AD DCs with Windows Server 2003 Standard SP1 and set them up as
AD Domain Controllers.
So far, things seem to be running normally with them with the exception of

THIS IS MY THIRD POST WITH THIS ISSUE?
I've had several replies requests if I have received an answer, I've yet to
receive any assistance
PLEASE anyone have any ideas

My question is regarding the article located at
http://www.windowsdevcenter.com/pub/a/windows/2005/03/22/de
ploying_office.html , as far as I can see the best
solution (for me atleast) is:

I have a wortking install of server 2003. I installled another MB w/dual
processors and it did not recognize the 2nd proccessor.
I found out I need to do a reinstall for 2003 to install the correct HAL. I
would also like to install to a RAID drive instead of the drive(s) I have ...

I have 4 servers in my Domain.  SQL server, Term server, Domain Server,
Domain Server.  2 of these are Domain Controllers.  How would you delegate
the 5 FSMO roles??
thanks

After upgrading a domain controller, with nothing but dns on it, to server
2003.  DNS has stopped working entirely.  This is a test domain that I have
setup to prepare for the migration to 2003.  I have re-installed the server 2
times now with the same results, starting with ...

I have one Windows 2003 Enterprise Server that is being co-located
for me at a datacenter. It's running some pretty important stuff and
a recent drive failure has prompted me to add another server as a
full-time backup server.

on win2003 sp1 I am not able to install recovery console because it says the
OS on CD is older than the OS on system(sp1).  Is there anyway to install
recovery console under this situation??
thanks

Whats the proper steps to transfer all 5 server roles to a different
server??
thanks

   I have a machine running Windows Server 2003 and IIS 6.0 for Web and FTP
hosting.  Last Friday I installed service pack 1 and connectivity stopped.
From inside my network i was able to access the ftp sites and the web sites
running on that machine and everything seemed ok.  ...