Gurus,
Which newsgroup is for ISA server questions?

I have a domain based on windows server 2003 R2 sp2 with xp pro sp2 with one
single domain name. There are three sites on my network. Each site has one DC
with active directory integrated DNS and DHCP. Also the DCs is WINS
server.Only the central site has two DCs. Suddenly before ...

I've a w2003 server with four XP clients. Independent server without Active
Directory.
Yesterday a virus infected the server and I've cleaned it, Now When I try to
access the server from the clients there is a message that says than

I have a Domain with one W2K3 PDC, another W2K3 file server (which also is my
WINS), and a third W2k3 server.  All client machines are XP Pro.
I have been experiencing slow network browsing, and ever once in a while a
network share will give the 'access denied' message, and then ...

I backedup my DHCP database on DC#2 and restored it to another server, DC#1
in the same Windows 2003 domain.  Both machines are Domain Controllers.
I then rebuilt DC#2.
I backedup the DHCP database on DC#1 and attempted to restore it to the new

I have a share on a 2k3 server IP 192.168.101.1
If the computer is in the same range ie 192.168.101.x - I can access the
share and ping no problems
If the computer is in the range 192.168.105.x or similar, access is

I am in quite a nice position of being able to start from a relatively blank
canvas, but need some advice on how to proceed.
(All servers Windows 2003 R2 with XP clients unless stated.)
I have a main office network (IP range 10.1.1.0/24) already in place with a

Hi, we have two networked PCs at a remote location connected to the WAN by a
business class DSL line and a wired linksys router.   We need to convert
from DSL to T1.  What kind of router will we need at the remote site and
what kind of router will we need on the home network?

Gurus,
What's your favorite enterprise monitoring tool or utility (such as NetIQ,
HP OpenView, Microsoft Operations Manager, What's Up Gold) and why (ease of
use, ease of installation, low cost)?  If you don't want to go into why just

Clients are getting ip from DHCP Scope but for some clients they
cannot access internet even they cannot ping to any public ip in my
network, this problem continues for around 20 hrs and after that they
can access internet.

I have 3 win2.3k servers with 2 nics the fist is a 10/100  second is gigabyte
on a seporate segment (8 port gigabyte switch).
I'm looking to configure the servers to "talk" to each other via the
gigabyte nic and have communications with the workstations over the 10/100.

I have a machine, bobo.
1) it is a member server of xyz.org (Active Directory Domain) - so there is
a computer account BOBO in the xyz domain
2) it's primary DNS suffix is set to abc.def.org (for reasons that are

I have a small client server workgroup.  The server is running small business
server 2003.  The room the server is in is not temperature controlled, so i
need to move the server.  Here's a brief description of our netowork layout.  
The internet modem and router are in the main ...

I got a new system with no documentation and I'm trying to see how
it's setup. Is there any way to tell from the hardware if the phone
line connecting into the server is a T1 or an ISDN? I believe the
cards are interchangable but I could be wrong.

i would like to team 2 broadcom nic's on my dell server
can the virtual ip be in a diffrent vlan (subnet) then the physical network
cards?
NIC A-192.168.100.150