We have a Win2k3 x64 cluster with 2 nodes for print services.  We have a
shared printer that is causing me fits.  This printer was created earlier
but it is missing now.  I could not explain why it is missing so I just went
ahead to recreated it.  I select the IP address that was ...

 I have a Windows Server 2008 cluster (2 nodes)
In this cluster I have two instances of MSSQL 2008 (active/active)
All resources are assigned at the same node.
Since 1 week I have a serious problem.

We have the following infrastructure: WUDSS 2003 R2 provides iSCSI
targets which are consumed by a Server 2008 R2 cluster and forwarded
as pass-through disks to Hyper-V guests.   We do not use VHDs for
Hyper-V and, until recently, we have used no MPIO for iSCSI.

In our environment we have recently discovered that we are unable to
remotely connect to clusters through cluster administrator.  The error we
receive is
"access denied Error ID 5: (00000005)"

We are looking to put a public DNS server in our DMZ but also want it to be
on our Hyper-V cluster.
I'd like to install a standalone Windows Server 2008 virtual server on our
Hyper-V cluster, but am concerned about security. The Hyper-V host is on our

The destination scenario should look like the image in
http://en.wikipedia.org/wiki/High-availability_cluster
Each node has 4 Nics
2 private and two public

i have a cluster create with wizard of 2008 R2 and during configuration
i select a ip address and name (Cluster 192.168.150.254)
Now i can modify the ip address? i cant' find how.
i whand assign 192.168.150.200 or 192.168.X.200

I think I discovered a BIG problem with Windows 2003 x64 R2 SP2.
Suppose I set a setup a server and connecting it to a SAN disk and then
format this disk. When I setup a secondary server to the same disk the disk
is seen as unformatted and Windows has to initialize it again, so I ...

I am looking to setup 2 node cluster, windows server 2003 with one local
drive on each machine.  I will also use shared storage connected via iscsi.  
This shared storage will house sql server 2005 and it's db files.  In
addition active server will server IIS application.

I am new to clustering but have idea that we need SAN for Clustering and
created a cluster on windows server 2008 R2 using starwind to have iSCSI.
The starWind software is evaluation version and it will expire in next 2
days. I want to setup a virtual cluster environment for ...

Good Day
Urgently need help to fix a corrupted folder on a windows 2003 cluster
file share , when we try to browse to or delete the folder it gives
file is corrupted and readable

I have installed a file server cluster and I have 12 different partitions on
a HP eva. each partition is asigned to a different server in the cluster.
When I use the mmc for failoverclusters and use  share an storage maintenage.
I can see that there should be an option for ...

I am setting up an NLB cluster to host a website using two w2k3 machines on
a test network using virtual pc 2007.
The first server (10.0.0.10) can be added to NLB cluster ok.
The cluster address is 10.0.0.100.

We have developed an application that runs as windows service. It is
dependent on NLB. We dont want to start our application unless NLB has been
initialized. I know i can add the service dependency but what is the service
name for NLB. i am unable to find any.