4/29/05
Dear Folks,
OK, a NEW problem:
It's a fresh install of Win2K with SP4, all Microsoft service patches and

4/29/05
Dear Folks:
A Simple Question:
Does re-running the complete Service Pack 4 Installer (I have it on CD) undo

I had to wipe and reinstall W2K on an IBM Netvista. now device manager shows
PCI device with yellow question mark. It tries to install new hardware but it
can't find driver on its own and I haven't got a clue as to what device it is
actually trying to install. I was able to ...

Dear Folks,
Two steps forward, one step back... <sigh>...
In the process of uninstalling all my Adobe apps (re: trying to get
Photoshop to work again), I managed to get Win2K (SP4) confused. When I

I need 3 files from the NT4 CD /i386 dir
PSCRIPT.DLL
PSCRPTUI.DLL
PSCRIPT.HLP

4/21/05
Dear Folks,
I'm running Win2K, SP4. Can anyone here tell me what file name(s) network
connection setting are stored under. I had to restore my system folder from

One of our old servers is still running NT4 build 1381.  Tried to install
Arcserve version 11.  Arcserve requires IE 5 or above.  Tried to install IE6.
Now requires sp6 before I can install anything.  Tried to install sp6 and
got the following error "Service Pack Setup cannot ...

       How can i identify my winnt4 server is patched w/ sp6a without
rebooting the machine? i.e. view the version like windows 2000!
       Also, any command i can identify PDC / BDC at my machine?
       Thanks.

Setup is unable to loact the hard drive partition prepared by the MS-DOS
portion of setup.

I am finding a solution to upgrade Windows 2000 Pro to Windows XP Pro
without formatting the hard disk,without any data loss and without setting
loss. Is it possible?Please advise.Thank first.
Thank you,

I have have installed a Samsung Syncmaster 710 v on to a compaq deskpro en
series which is set up with windows nt 4.0. after turning the comp on the
display went back to standard graphics mode. i have tried to re install the
ATI pro rage graphics adapter but the display stays in ...

On Compaq Deskpro EXS w 1.4 G P4 & 2 64MB RAM sticks, I get through entire
installation of NT4 until last step where video driver seems to be loaded.
Then I get the above crash code. I had an AGP video card (not a pro/8x) and
switched to a PCI video card thinking this may have ...

i got this error when my i up my Server NT 4.0 due to Server Crash this
morning,
Windows NT could not start because the following file is missing or corrupt:
<WINNT ROOT>\system32\hal.dll