I've tried to uninstall my operating system NT 4.0.
How to do this?
Allready tried that at DOS window with no succes.
When I boot my PC it goes straight to status where I can

I'm trying to install Windows NT using a SCSI CDROM.  I'm
using an Adaptec AHA-1540CF SCSI card and a Toshiba SCSI
CDROM.  During system POST the SCSI card reports that it
sees my SCSI CDROM and SCSI Hard drive (on different

on a lan type connection network and now I cannot login to
this computer at all.  How can I by-pass the login, to
change the network connection to LAN again.  Right now at
the login prompt I see no domain field, and the computer

Trying to logon to NT 4.0 workstation. I do crtl-alt-
delete to get to login screen and nothing happens. Anyway
to bypass this to get to files??? Please email response
to melmjd@comcast.net

I'm having a problem with NT4 Server Enterprise setup. Basically I don't
have a floppy drive and therefore can't boot from or write the floppy boot
disks. When I install NT using "winnt /x /b" (therefore avoiding the
floppies) (the installation files are on a partition D:\ of the ...

       I am facing disk space problem on my Compaq ML 530
server,actually this is my SAP production server with SQL
7.0 installed.primary Partition is of 4.0 Gb .But now it
is showing it in my computer of 2.0 Gb & very less disk

I installed a 56k dial up modem.  I followed the
directions to make a new connection, and the modem will
dial my ISP, and connect, but I cannot get any websites to
come up.

I have a peer-to-peer network with 4 PCs; one using NT Workstation, one
using Windows 95, one using Windows 98, and one using Windows XP.  All but
the Windows 95 PC can share files and printers with the Windows NT
Workstation PC.  If I click on Network Neighborhood on the NT or ...

I am running Windows NT 4.5. The problem is when I log on
windows does not display anything on the desktop. There
will be a blank light blue screen and nothing else. If I
press Ctrl Alt Del again the task manager will pop up but

I went into Disk Managment on my NT 4.0 SP6a workstation
and enabled an 8 meg section of the HDD as an Extended
partition, that was shown  as "unavailable".  It created
the partition as the E:\ drive and displayed it as

    When I switch to "Unattended Startup" then re-boot,
my keyboard locks and the keyboard lights flash.  does
anyone know how I can fix this?
Thanks,

is there a way to install a windows service server in a
windows NT 4.0 sp 6 workstation so that i would be able
to control that pc remotely?
please, any help will be welcome!!!

I have got a computer running Windows NT, but there is
nothing on the bottom toolbar to allow me to go straight
to the desktop.  I can't seem to find the little icon that
you get with other Windows (95/98/2000) where you click on

I'm getting a series of 1's and 0's on the display after
rebooting from the Windows NT 4.0 Workstation installation
media on a 700mhz Pentium III.  The hard disk is formatted
with NTFS and I've installed this system from the original

anybody know how i expand an logical drive in winnt sp4?
Based on a 4 Disk HW Raid5 Array.
I put another disk into server and extended the array
That works as usual...