I want to convert an existing BDC to a member server.  How
is this done?  Will it affect any files or programs
currently installed?

I have a newtork with 3 XP Pro boxes and 1 NT4.0 box connecting to the
internet via a Linksys BEFSX41 Firewall Router.
XP Pro boxes are all SP1a with built-in firewall turned off.  They are all
in the "WORKGROUP" workgroup, and getting there IP addresses via DHCP from

Sir,
I had loaded NT (dual boot 98 and nt loaded os in common
drive c ,and make two partision one if FAT and other is
NTFS)from mother board which is supporting XP 512 mb ram.  

When installing NT 4.0 Server on an x86 computer with (2)
SCSI HDDs on an Adaptec controller, Setup will install NT
on the drive specified as the Boot Device in the Adaptec
controller BIOS. I know this to be true because I have

Hey folks,
I have just setup an XP Pro client (laptop) for all
totally NT4.0 sp6 network.
Everything seems to be going ok - except there is a

I seem to remember a command line switch for winnt that
would create the boot sector for the boot drive.
IE: winnt /x /b ???
It goes through the file copy process but after the reboot

I need to go from XP back to NT 4.0.  I cannot run the
setup it tells me "It is not recommended that Windows NT
4.0 be installed on this version of Windows."  I cannot
boot from the NT CD either.  Please can someone help me

When installing NT 4.0 Server on an x86 computer with (2)
IDE HDDs, how does Setup determine which drive is to be
used for installation?
Does it use the Primary Master, the Boot Device specified

Can you tell me where I could find instructions on how to
set up VPN connections on an NT Server 4.0?

Do you know if there?s a way to produce a "black box" with NT 4?
I?d like to do a couple of print servers without vga controller /  kb /
monitor, or at least without mouse / keyboard.
Is this possible with nt4?

One of my users is getting a message that his windows password will expire in 13 days. They get an option to change it. If they say no, they will be logged in. This carries on until the password is expired and they have to change it.
Is there a way of changing this so that the ...

A hoax mircosoft email containing a virus has been opened
on my NT4 workstation.
Pandasoft antivirus software recoginised the virus and
appears to havea system file.

My Nt workstation lost part of its boot up informatioso
it could not start up it said that it had lost a kennal
so i ran a repair disk but from a another machine every
thing went well but I lost the admin password

Someone has set my NT Workstation to automatically logon
as "user".  I now need to logon as "Administrator" to
make some changes, but the "Logoff" button is disabled.  
How can I get logged back in as "Administrator"?

I have a client that has a few XP Pro boxes, but insists on adding an old
NT4 box.  For some reason, I can not get the boxes to see each other.  They
are all connected to the internet through a Linksys BEFSX41 router.  They
all see the internet just fine.  They can all ping each ...