I would like to migrate my NT 4.0 server to a new box
using 2000. I have heard about some migration tools, and
was wondering if there was something specific that could
save me some work.

I am trying to install windows 2000 on an ibm thinkpad
390x. I have tried just about tried everything. I tried
upgrading the old operating system which was windows nt.4
and windows 2000 loads all the files and then just hangs.

I just upgraded fron NT 4 to 2000 server. The NT had the
small boot partition on c and the large partition on D.
Is there any way I can expand the boot partition to cover
both partitions? (one large c partition)

Second request for help on this as there was no answer to
my earlier one ... After a "successful" upgrade install
(i.e., the install portion shows no errors), the WIN2000
Professional system now eith SP4  

where can i get win2000 resource kit package?i'm looking
for ntrights.exe.Thanks.

If I plan to Migrate my current NT4 users to a totally different W2k domain,
is there anything that needs to be done with the NT4 SAM, or can I just
migrate them to the new domain?
Debbie

i recently upgraded from win 98 to win 2000 pro. i
reinstalled all drivers from motherboard disk for all that
weren't included on win 2000 disk but i still can't get
the modem to work. within the device manager i get an

I'v upgrade from 98SE to 2000. I can not boot in normal
mode (I get a blue screen). When I boot in Safemode,the
following is Found under: Accessories\System tools\System
Information\Components\Problem Devices

Microsoft Client
this is the latest version of security update, the
"September 2003, Cumulative Patch" update which eliminates
all known security vulnerabilities affecting

This is our scenario:
1x PDC NT4 SP6a
2x BDC NT4 SP6a also both running Exchange 5.5
These are in the domain "sales", however we have a Win2k domain called

I ENCOUNTER A PROBLEM FOR W2K ENGLISH. AFTER UPGRAGE MY
COMPUTER W2K FROM SP3 TO SP4, MY W2K SYSTEM CANNOT SHUT
DOWN PROPERLY. I WONDER THIS IS A BUG. ANY ADDITIONAL
PATCH NEEDED?

in windows 98 there is a command "msconfig"; what is the
Windows 2000 command for the same editing?

During win2000 installation, win can't copy the
ipconfig.exe file. somehow, I've successfully installed,
can any one tell me how to copy these file into the PC,
beause I'll need these file to IP config.

Hello --
I have just upgraded from NT4 to 2000. I have two serial ports installed on
the motherboard. In the BIOS these are shown as COM1 (3E8, IRQ4) and COM2
(2F8, IRQ3). However, the Control Panel\Hardware\Device Manager\Ports shows

I have been using HP Laserjet 6L for long with windows 98.
due to pc problems, i have also loded windows 2000
professional. I am not able to print when i am in 2000
while there is no problem when i use with 98. what could