I have win2k Adv server pre sp1 cd. We need to re-install. How do I update
my media. In other words how do I apply Service Pak 4 to cd and than proceed
with installation.
Many Thanks

problem :
we have LAN with local ip address like 192.168.0.1 to 250. In this network
our router with ip address (192.168.0.101) is also connected to one of the
switch in the same network. Now in TCP/IP property setting if a user gives

I hope I am posting in the right forum. My apologies in advance if this is
not the case.
I have pre SP1 original WIN2k CD. We are changing hardware and it is very
difficult to install. How can I update my CD toSP4. Please advice in detail

Hi,
I am setting up a network in my company.
The server is windows 2000 Advanced server.
I have set up a DHCP scope which seems to be working.

I have created an intranet site on my win 2000 advanced server.
It dispalys the html pages ok but I cannot get my ASP pages to appear.
Can anyone tell me what I need to do to fix this.
Thanks

Our network uses DHCP to assign the addresses and set the default gateway to
10.0.0.1 (router), however our network design is going to change, with a L3
swtich replacing the backbone.  The switches IP is 10.0.0.4, if we add that
as the default gateway it could take up to a week ...

Thanks in advance,
I recently swapped my home machine from
a company-built 2000pro to windowsXP sp2
I need to install the MS resource kit "autolog" utility,

I have a file server running windows 2000 server on HP Netserver LC2000
UT (SCSI controller).  Recently, i noticed that there're a lot of disk
error messages in the event viewer:-
Event Type:    Error

I have reset password for IWAM user many times and reatedly get following
errors.
Event Type: Error
Event Source: DCOM

I am copying files from  map direction to local file by using robocopy
command "robocopy v:\ d: /e".  It copies file from beginning and after a
while it is shown "Not enough quota is available to process this command".
This is the same with xcopy command.  One thing is souce folder ...