I have a Windows 2003 SP2 64 Bit system.  It has 2 integrated Broadcom NIC's
that are teamed and setup with the server IP address.  It also have 4 other
NIC's with Internet Protocol (TCP/IP) disabled which will be used for VM's
After installing VS R2 SP1 and rebooting we lose all ...

My server crashed that had W2K3 and Virtual Server 2005 R2 installed.  I
setup a SBS2003 VM on the server.  The mother board went bad so I still have
the data on the hard drive.  I built another W2K3 E server, install Virtual
Server 2005 R2 sp1.

I found my virtual machines create .vsv files on my C drive. I am running out
of the C drive space. Is it possible to move that .vsv file to D drive?
thanks
WW

How do I identifiy whether a server is running 64 bit or 32 bit Virtual
Server 2005 R2?
Thanks

Virtual Server 2005 R2 SP1 on Windows Server 2003 R2 x64
Periodically (not always; in about 50% of cases) virtual system fails to
restarts (Windows 2003 Web Edition) and hangs with "disk read error". I tried
both, dynamically expanding and fixed virtual disks but problem persist.

I am running Vista Ultimate and VS on my home machine (workgroup).  while I
have no problems, and can always get in with creds via the IE Master Status
Screen, I always have the VMRC Negotiate Authentication window popup.  
Is there any way to disable this so I can just get ...

I want to install Windows 2003 64-bit as the host server.  Will I be able to
install Windows 2003 32-bit as a guest OS?
TIA.
-Steven-

I have installed VS 2005 R2 SP1 on W2003 EE R2 SP2
I have create a virtual machine and I have create a domain
in this virtual machine.
Now I have join host machine to the domain in VM,

i installed virtual server on a H drive, instead of the default C drive, and
then i change the default path to point to H drive. at one point i got the
network connection to work, but after restarting the host, somehow i am
getting a limited network connectivity for my virtual ...

    We are configuring a hosted disaster recovery server, which is running
Windows Server 2003 x64. Since it is hosted, we utilize Remote Desktop to
access the server and perform all functions. I've installed Microsoft
Virtual Server 2005 R2 Standard on it, but when attempting to ...

I have setup "Run virtual machine under the following user account" with a
new domain account. Set to auto start if running, delay of 30 secs and save
state on stop. On "OK" there are no errors.
I have set permissions on VMC,VNC and VHD as suggested in Administration doc

Hello everyone, here's my delimma:
I've recently installed Red Hat Enterprise Linux 4 (Update 5 & Update
4) onto a VM running on a dual processor Xeon machine running W2k3
x64. The install goes well enough, and the system boots, but whenever

Is there any way to gain console access to the individual vm's on MS Virtual
Server? I know there is remote access, but even rdp with the console switch
doesn't seem to access the console. We have a couple of XP vm's and we have a
situation where we would like to view what is ...

We are running Microsoft VS2005 R2 on a Dell box w/W2k3 server.
We have a VM running Win NT 4.0 sp6a.
I need to install a legacy app which is installed using a floppy drive.
I have configured the VM to use the physical floppy drive on the host (which

after upgrading Virtual Server to the most recent version (1.1.603.0 EE R2
SP1), VSMT/ADS is not working properly anymore.
I'm seeing messages like "Valid bmcp message received" staying there for
more than 10 min., and after that it takes an hour to get 5% done; before,