I'm having what appears to be routing issues with ISA 2004.  I have a
IPSEC/VPN connection to a vendor with a Cisco ASA 5505 because NAT
interesting is required. Here is the set up:
Clients behind VPN Server (192.168.50.XXX, 255.255.255.0) ----Public

Is there a way I can configure ISA 2000's wpad.dat script so that when
clients auto-detect they only are instructed to use the Proxy Server for
just the HTTPS protocol.
The reason is I have an inline device that can detect viruses and other

We recieve this error message every +-20sec on our ISA server in the System
log:
Event ID 10009 Source DCOM error
DCOM was unable to communicate with the computer %computername% using any of

I have ISA server 2006 SP1 with 2 NIC, External and Internal. There is a
publishing rule:
publishing: HTTP 80 listener on External, forward to internal web server on
80, no auth.

This might not be the right place where to ask this question, but, for me,
it seems the closest.
We have a few applications published through ISA for our external users.  
The applications are published initially through Citrix. Most of the days,

I have a problem with the following scenario (ISA 2004):
192.168.60.x ----- ISA1 ---- internet ------ ISA2 ----- 192.168.1.x
the problem appears on ISA1
both networks 60.x and 1.x are connected by an IPSec tunnel

I've installed ISA 2006 on Windows server 2003. I've problem, I can't open
ISA interface, can not uninstall. it's service ISASTGCTRL is stopped and
when i start it manually, it get started but then stop immediately. please
help how to fix.. I really need urgent help.

When ISA creates predefined reports, it places them in timestamped
separate folders under the report root folder.
This is fine, but for a couple of daily reports I want the updated
reports overwrite the existing report html and images.

For various reasons our ISA 2006 Std is behind a Juniper firewall.
ISA's external (WAN) interface is connected to the trusted side of this
firewall.
ISA's WAN adapter (External) has IP 192.168.100.10 with gateway

We have a SBS 2003 server with isa 2004 (192.168.3.1) and a terminalserver
w2003 (192.168.3.3)
The terminalserver has as default gateway the sbs server.
We configured a site to site vpn with a cisco 800 to our isa server. We can

If I go to sites like apple.com, dell.com I get a message:
Denied Connection
Log type: Web Proxy (Forward)
Status: 12202 The ISA Server denied the specified Uniform Resource Locator

I have just rolled out a few ISA 2006 SP1 servers on Win Svr 2003SP2.
I can RDP to these ISA svrs via the LAN NIC.
My problem is that after a few days, I can't RDP to it.
Usually, if I restart the ISA Control Service, I can connect for another few

We are running SBS 2003 and have ISA server 2004 installed.  Our server has 2
nic's with 1 for LAN and 1 for WAN.  We need to create a VPN connection going
out each day in order to collect data from 1 of our suppliers.  No problem to
create the connection, but, while the ...

I have a win2003 srv R2 Sp2 with isa 2006 std sp1.
I need to migrate it to another hardware server, recovered from the lan
server farm consolidations. It's much powerfull than the actual one that I
have in production!

Hi all. I am trying to configure monitoring on isa. I would like to be able
to see what are the ip addresses that are connecting to my specific server.
Hence under monitoring under logging tab i have set a query by specifying
destination ip to my specific server. However i can ...