I have an ISA 2000 box acting as cache only and it is causing problems for
some contractors we have in who need to access their own company Outlook Web
Access.  How can I set it so that their web traffic to their OWA site only
is not sent through ISA?

I need publish POP3 From ISA Server.
how can do it?

If I wanted to do this, what port would I need to set ISA to work on? I
take it that 8080 will be no good.  Will 80 work, as a default?

Hi,
I need to configure ISA server 2004 so:
1. if someone write http://mail.company.com/exchange should redirect it to
https://mail.company.com/exchange

I am having a time trying to get RSS webpart feeds to work through ISA2004.
I have a firewall policy allowing all traffic out from the IP adress of the
Sharepoint server. (only one)
And I have the following entry in the web.config file.

We have an ISA 2006 server configured as a web proxy on a Corporate network.
Everything works fine for the internal domain users. However we have users of
3G data cards who enter the network behind a hardware firewall and only the
proxy port is allowed through to the ISA. When we ...

I have an array of 2 isa 2006 EE servers.
Another server was used for the Configuration Storage Server (CSS)
containing a bunch of rules.
But yesterday, the css server completely crashed.

I had installed a trial version of ISA 2006 Enterprise Edition. Now the
trial period has expired and I bought an ISA Standard Edition 2006.
I  exported the configuration and if I now try to import it there comes an
error that it is not the same edition....

Okay, I know the conventional wisdom for configuring ISA servers with
multiple NIC's is to enable the DG on the EXTERNAL interface, and build
routing rules for all internal networks that fall in the "network behind a
network" category.

I've 2 ISA 2006EE with NLB enabled. All is working fine (included
service publications like Exchange 2007) but my internal users cannot
connect to remote Cisco VPN sites using VPN client. Rules are created
and when NLB service is down (ie. a server is off) they can connect

I'm having problems with setting up extension blocking rules in the http
filter. Apparently ISA cannot correctly determine file extension, for
instance: when ".com" extension is added to the block list, ISA starts to
block some URLs which contain .com in their path:

Outlook Web Access and Remote Web Workplace both return website cannot be
found when access is attempted using IE6 & 7.  In IIS, the default website is
down.  When I attempt to start it, I receive the message "The process cannot
access the file because it is being used by another ...

Running ISA 2004.
I need a how-to guide or an article on how to open ports on ISA server for
specific applications, such as yahoo cam and audio servcie.
Regards

I have a hardware firewall that has two T1 connections from two
different ISPs on the WAN side and a single LAN gateway for my local
network.
Is it possible to set up a 3 leg ISA 2006 server with its external

I am installing an ISA 2006 server with 3 NICS, one on the LAN, one to
the Internet and one for a DMZ. I have internal DNS servers on my LAN
that return LAN IP addresses for other internal servers. Should I
specify those DNS servers on the external NIC, or should I specify my