I'm trying to configure a ssl-connection between 2
exchange2000 servers. The current situation is this:
Each server has 2 SMTP virtual servers, 1 default and 1
for ssl. Each server has 2 SMTP-connectors, one for the

I have an environment with multiple exchange sites, windows 2000 sp4,
exchange 2000 sp3. Let's say site A, site B, site C. Multiple routing
groups with connectors are in placed. Everything's been working fine
until recently. A particular user (not all), from site A sends an

Just setup exchange2000 server, local email exchange fine.
can send out emails, but can't receive any internet emails.
DNS records is changed on ISP server.
Could you give any information how to configure SMTP to

A customer of mine has a exchangeserver on a dialup adsl line *g*. The
MX-Record is set to their provider. Now I wrote a little programm
collecting the mails via POP3, and pumping them via SMTP into their
exchange server. This works all fine, but if there is more than one

When sending email to a certain user, the mail is bouncing
back with the following error:
Your message did not reach some or all of the intended
recipients.

Hi, I am having problem with client unable to send mail to
3rd party outside the domain. We can received mail but
unable to send out mail. I used Linux as proxy server.
Please reply.

Mail between the 2 E2K servers will not flow in either direction between server1 and server2 but outside mail and telnet on port 25 between the two works in either direction. Can successfully send email each direction using telnet on port 25.  Outside mail getting through to ...

We have Exchange 2000 running on a AD Domain Controller
(one of 3 domain controllers on the network). Due to
issues with AD, we had to forcibly remove the Exchange
server as a domain controller (DCPROMO /FORCEREMOVAL..).

Do First Routing Groups under different administrative groups count as same
routing group? Let's say I have CA, CO, TX administrative groups which under
these group, all have the same name for the routing groups. Do they count as
the same routing group or different routing group? ...

i have this message with oultook expres
The message could not be sent because one of the recipients was rejected by the server. The rejected e-mail address was 'nicolas2@pl.randstad.com'. Subject 'test', Account: '10.46.0.110', Server: '126.0.0.2', Protocol: SMTP, Server Response: ...

Hi, I'm looking for some advice on a tricky wee problem we
have here.
We have an issue with a particular company trying
unsuccessfully to send us email. We have no problems

Is there a way to send all outgoing SMTP email for a
particular mailbox through a different gateway?  I know I
can set up a routing connector but that affects the entire
server.  Can I do this just for a certain mailbox?

I'm having a problem with two servers replicating data.  
I'm getting this error msg in the event logs:
Event Type:    Warning
Event Source:    MSExchangeIS Public Store

Very frustrating. I installed Exchange 2000 on a Windows
2000 server, which is a member server of a Windows 2003
domain. There are so many problems. When I create a
Groupwise connector, the Email can be delivered from

Hi...
My company's mail service was being hosted by a third
party vendor. I built an Exchange 2000 server so that we
could host our own mail services.