Installation

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Md. Ilyas - 28 Aug 2004 18:24 GMT

I am unable install NT 4.0 server on either SCSI or IDE
ATA hard drives. why ?. I tried on Different different
machines.

Reply to this Message

"Mark Wilson" - 23 Sep 2004 23:21 GMT

The mostly likely cause is the drive controller does not have a driver on
the NT4 CD. Pressing F6 when the NT4 setup is starting will allow you to
specify additional mass storage drivers in the same manner as Windows
2000/2003. The difference is NT4 does not display a prompt for you to
press F6 like the later versions of Windows. Make sure you have the
appropriate NT4 drivers on a floppy diskette for this procedure because
floppy diskette is the only source from which Windows Setup will install
additional mass storage drivers.

--------------------

| I am unable install NT 4.0 server on either SCSI or IDE
| ATA hard drives. why ?. I tried on Different different
| machines.

Mark Wilson [MS]
"This posting is provided "AS IS" with no warranties, and confers no
rights."

Reply to this Message